Decontamination of Treatment Areas
The patient treatment area should be cleaned after every session using disposable cloths or clean microfibre materials – even if the area appears uncontaminated.
Areas and items of equipment local to the surgical couch that need to be cleaned between each patient include:
- Local work surfaces;
- Surgical chairs;
- Curing lamps;
- Inspection lights and handles;
- Hand controls including replacement of covers;
- Trolleys/delivery units;
- X-ray units.
- The surgical bed is cleaned between each patient, and is free from rips or tears.
- All surfaces (i.e. walls, floors, ceilings, fixtures and fittings, and chairs) are free from damage and abrasion. All work-surface joints are intact and seamless with no visible damage. All surfaces (i.e. walls, floors, ceilings, fixtures and fittings, and chairs) are free from dust and visible dirt. [if you notice any then you must escalate that to the lead and to the doctor]
- The surfaces of accessible ventilation fittings/grills are cleaned weekly.
- All surfaces in clinical and decontamination areas are impervious and easy to clean.
- Keyboard covers or “easy-clean” waterproof keyboards are used in clinical areas.
- Areas and items of equipment that need to be cleaned after each session include Taps; Splashbacks/Sinks.
- In addition, cupboard doors, other exposed surfaces (such as dental inspection light fittings) and floor surfaces, including those distant from couch, should be cleaned daily.
Items of furniture that need to be cleaned at weekly intervals include:
- Window blinds;
- Accessible ventilation fittings;
- Other accessible surfaces such as shelving, radiators and shelves in cupboards.
For blood spillages, care should be taken to observe a protocol that ensures protection against infection. The use of hypochlorite at 1000 ppm available chlorine is recommended. Hypochlorite should be made up either freshly using hypochlorite-generating tablets or at least weekly in clean containers. Contact times should be reasonably prolonged (not less than five minutes). A higher available chlorine concentration of 10,000 ppm is useful, particularly for blood contamination. The process should be initiated quickly and care should be taken to avoid corrosive damage to metal fittings etc. The use of alcohol within the same decontamination process is not advised.